Antex electronics TriplePlay Multizone Satellite Audio Receiver Uživatelský manuál stáhnout pdf (Strana 9)

If *ULz,ccc,pppp{cr} is sent, the receiver will unlock channel ccc for the

requested zone z if the password pppp is correct.

Returned *ULz,1{cr}{lf} if unlock is successful

*ULz,0{cr}{lf} if password is incorrect

*SLz Select command

This command is the equivalent of the select button on the front panel. It

can be sent after a *CD, *CU, *CGD and *CGU command to cause the

receiver to direct tune to the last channel sent by these commands. This

command must be sent within 4 seconds of the previous listed commands

or it will be ignored.

*XIDz Serial Identification Number Query

This command is used to query the 8 digit identification number of each

music zone. The number following the ID is the zone (ie *XID1 queries

zone 1).

Returned: *XIDz,nnnnnnnn{cr }{lf}

*Zz Zone select command

This command changes the currently active zone.

If *Z1{cr}{lf} is sent zone 1 will become the currently active zone.

Nothing is returned.

*MZ1 Zone 1 Mute ON command

Mutes Audio Output on zone 1.

Return: command echo.

*MZ2 Zone 2 Mute ON command

Mutes Audio Output on zone 2.

Return: command echo.

*MZ3 Zone 3 Mute ON command

Mutes Audio Output on zone 3.

Return: command echo.

*UM1 Zone 1 UNMute command

1 2 3 4 5 6 7 8 9 10

Žádné komentáře

Antex electronics TriplePlay Multizone Satellite Audio Receiver Uživatelský manuál Strana 9